30
5
System Settings
Setting Date & Time
5.1
You can set time and date for the Signage. Remember to select a correct time zone based on where
the Signage lies.
On the home page, select
Settings > Date & Time
.
Step 1
Set date, time, and time zone. You can also enable the 24-hour format.
Step 2
The operation takes effect immediately.
Enable IPC time setting, configure the
Renewal cycle
(24 hours by default), and then click
Step 3
Save
. The time of IPC will be synchronized with that of the Signage within the defined
renewal cycle.
Enable NTP time setting, configure the
Renewal cycle
, and then click
Save
. The time of the
Step 4
Signage will be synchronized with that of the NTP server within the defined renewal cycle.
Date & time
Figure 5-1
Selecting Input Source
5.2
Input sources include
Local
(default) and
HDMI
.
Local
: Play projects from your USB drive or through MPS.
HDMI
: Play projects from the HDMI input source, for example, your PC.
Different devices support different input sources.
On the home page, select
Settings > Input Source Setting
.
Step 1
Input source
Figure 5-2
