Basic Operations 22
Icon
Description
Click this icon to adjust the backlight value.
Click this icon to select an input source from "local" and "HDMI." VGA is not
supported now.
Click this icon to enter the quick play interface.
Click this icon to lock your Signage.
Click this icon to disconnect your USB from the Signage.
Configuring Date & Time
4.5
You can set date and time for your device. Remember to select a correct time zone based on
where the device lies.
In the main menu, select
Settings > Date & Time
.
Step 1
The
Date & Time
interface is displayed. See Figure 4-5.
The date & time interface
Figure 4-5
Set date, time and time zone. You can also enable the 24-hour display format here.
Step 2
Your settings will take effect at once.
Displaying Programs
4.6
Connect the Signage to the platform and then you use the platform to send programs to your
Signage. Or, you can insert a USB drive into the Signage and operate the Signage to play the
videos & pictures in the USB.
4.6.1 Displaying Programs from Platform
4.6.1.1 Procedure
Procedure
Figure 4-6
