Initial Configuration
18
Click
to enable P2P function.
Step 2
Click Finish to save the settings.
Step 3
After the configuration, you can register a device to the APP to view remote video and
play back records.
3.4
Registering Remote Device
After you register the remote device to the system, you can view the real-time video from the
remote device and change remote device settings.
The Device supports two adding modes: Smart add and manual add.
Smart add: It is to search the remote devices on the same network and then filter to
register. It is useful if you do not know the exact IP address.
Manual add: For some remote devices, you can input IP address, user name, and
password to register.
NOTE
Uninitialized remote device cannot register to the system. For detailed information, see
User’s Manual.
The following contents are introduced in the example of smart add. For the operations of
manual add, see
User’s Manual
.
Click
on the top right corner of the window and select DEVICE.
Step 1
The DEVICE interface is displayed. See Figure 3-8.
Device manager
Figure 3-8
Click
or click Add and select the Smart Add tab.
Step 2
