Initial Configuration
15
Time Setting
Figure 3-4
Configure the parameters. For details, see Table 3-2.
Step 2
Description of system time parameters
Table 3-2
Parameter
Description
Time
Configure the system date and time. You can choose manual setting or
auto sync to NTP server.
Manual Setting: Select the Manual Setting check box and configure
the date and time according to practical situation.
Sync with Internet Time Server: Select the Sync with Internet Time
Server check box, enter the IP address or domain name of the NTP
server, and then enter the time interval.
Time and Date
Format
Select the display format of system date and time.
Time Zone
Select the time zone that the Device locates.
Click Next to save the configuration.
Step 3
IP Address Settings
3.3.2
Modify device information such as IP address and DNS server according to the network plan.
NOTE
There are four Ethernet ports available. Make sure that at least one port is connected to the
network before setting the IP address.
Click Next on the Time interface.
Step 1
The IP Set interface is displayed. See Figure 3-5.
