Dahua Stereo Vision Network Camera Quick Start Guide
5
Figure 2-2
Step 1
Use wrench to separate the device from the bottom cover.
Step 2
Mark bottom cover mounting hole sites on the mounting surface and dig holes, and then insert
expansion bolts into the holes and lock them firmly.
Step 3
Align screw hole of bottom cover with mounting hole sites on the mounting surface, and then
twist the self-tapping screws into the screw holes and lock them firmly.
Step 4
Align the triangle indication sign, fix the device on the bottom cover according to the arrow
direction, and then tighten the screws firmly.
Step 5
Adjust the enclosure and make sure the lens stays level.
Install Device via Quick Mounting Board
Figure 2-3
Step 1
Mark mounting hole sites of quick mounting board on the mounting surface and dig holes, then
insert the expansion bolts into the mounting holes and lock them firmly.
Step 2