Dahua IPC-HDB3202 Series Page 30 User Manual Download | Manualshive

Page: 30 / 38

background image

24

Step 2

Before you go to the Step 4 in the chapter 3.2.1 installation steps, please pull through cable with the

waterproof airproof plug to the device chassis via the installation hole at the bottom of the chassis and

then connect the cable pins.

Step 3

Refer to Step 4 and Step 5 in the chapter 3.2.1 installation steps to install and connect the cable pin to

the device and then follow the proper steps to go on the installation.

Important

This series product has the power connection pin and I/O connection pin for you to pull through

the signal cable.

3.3

Micro SD Card Installation

Warning!

Please unplug the device power cable and then shutdown the device before you install the Micro

SD card.

Step 1

Please refer to Step2 in chapter 3.2.1 installation steps to open the device protection enclosure.

Step 2

Please find the

“SD” mark inside the device and adjust the Micro SD card direction according to prompt

direction. Insert the card to the slot and then install the Micro SD card. See Figure 3-11.

Figure 3-11

Step 3

Please refer to Step 7 in chapter 3.2.1 to put the device protection enclosure back.

All manuals and user guides at all-guides.com

«
...
28
29
30
31
32
...
»

Summary of Contents for IPC-HDB3202 Series







































Reviews:

No comments

Related manuals for IPC-HDB3202 Series

Brand: Hama Pages: 60

Brand: Q-See Pages: 141

Brand: Q-See Pages: 12

ENVIROMUX-IPCAM-NPOE

Brand: NTI Pages: 5

Brand: Zipato Pages: 2

HUNTER-PRO 32 RXN-9/416

Brand: Pima Pages: 20

Brand: Edimax Pages: 137

Brand: Spartan Pages: 18

Brand: Nice Pages: 12

Brand: hager Pages: 2

Brand: M-system Pages: 2

Brand: STEINEL PROFESSIONAL Pages: 6

Brand: Idis Pages: 22

Brand: Idis Pages: 16

Brand: Infinique Pages: 163

BURGcam ZOOM 3061

Brand: Burg Wächter Pages: 76

IP EYE ANYWHERE 241 - ADVANCED

Brand: Marmitek Pages: 72

Brand: Wansview Pages: 51

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands