17
3
Installation
Important
z
Before you complete the installation and setup, do not remove the electrostatic attraction
film on the transparent enclosure. Otherwise it may result in injury.
z
After remove electrostatic attraction film, do not touch dome enclosure in case it may leave
stain.
3.1
Device Installation Introduction
Please refer to Figure 3-1 for device installation space information. You can use screws (diameter is less
than
4.5mm
) to secure the device. You can see there are installation position map and installation
screws in the accessories bag for you to install the device conveniently.
Figure 3-1
3.2
Device Installation Steps
3.2.1 General
Installation
The general interface is shown as in Figure 3-2.
IR Motorized Zoom Lens Series Non-IR Series IR Manual Zoom Series
Figure 3-2
