Dahua iDVR&iHCVR Page 74 User Manual Download

Page: 74 / 262

Dahua iDVR&iHCVR

User’s Manual

Main

The

The 2

Menu Note

System

Device setup, date setup, holiday setup.

Display

Menu display, TV adjust, tour and zero-channel

encode.

PTZ

Set the communication protocol, baud rate bit

and etc with the PTZ device.

ATM/POS

Set COM and network overlay mode and sniffer

setup.

Voice

File management and audio broadcast setup.

Account

Maintain user group and user account.

Auto Maintain Set auto maintain items.

Import/Export

Import/export device configuration.

Default

Select some or all items to factory default setup.

Upgrade

Upgrade device via USB device.

4.8

Operation

4.8.1 Search

Click search button in the main menu, search interface is shown as below. See Figure

4-32.

Usually there are three file types:



R: Regular recording file.



A: External alarm recording file.



M: Motion detection recording file

Summary of Contents for iDVR&iHCVR







































































































































































































































































Search results

Summary of Contents for iDVR&iHCVR

Reviews:

Related manuals for iDVR&iHCVR

Brands by name

Popular brands

Dahua iDVR&iHCVR, User Manual

Search results

Summary of Contents for iDVR&iHCVR

Reviews:

Related manuals for iDVR&iHCVR

Brands by name

Popular brands