Dahua HDBW2831R-ZAS, Operation Manual

Page: 244 / 256

Quick Start Guide
4
2
Network Configuration
Device initialization and IP setting can be finished with the "ConfigTool" or in web interface. For more
information, see the
WEB Operation Manual .

Device initialization is available on select models, and it is required at first use and after device is
being reset.

Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stays in the same network segment.

Planning useable network segment properly to connect the device to the network.

The following figures and interfaces are for reference only, and the actual product shall prevail.
Initializing Device
Double-click "ConfigTool.exe" to open the tool.
Click .
The
Modify IP
interface is displayed. See Figure 2-1.
Modify IP interface
Click
Search setting
.
The
Setting
interface is displayed.
Enter the start IP and end IP of the network segment in which you want to search devices,
and then click
OK
.
All the devices found in the network segment are listed.
Select one or several devices whose
Status
is
Uninitialized
, and then click
Initialize
.