Dahua HCVR8204A-S3, User Manual

Page: 96 / 446

86

From main menu->Setting->Event, select corresponding event and then enable
record function. Refer to chapter 4.14 Alarm events for detailed information.

From main menu->Setting->Storage->Record, set record mode as auto. Refer to
chapter 4.8 Record and Snapshot for detailed information.
4.1.4.7.2 Snapshot
Device snapshots images as you set here.
Refer to chapter 4.1.4.7.1 Record for detailed information.
Note
After setting in the Schedule interface, please refer to the following contents to enable
schedule snapshot function.

From main menu->Setting->Event, select corresponding event and then enable
snapshot function. Refer to chapter 4.14 Alarm events for detailed information.

From main menu->Setting->Storage->Record, enable snapshot function. Refer to
chapter 4.8 Record and Snapshot for detailed information.
Quick Setup
Copy function allows you to copy one channel setup to another. After setting in channel 1,
click Copy button, you can go to interface Figure 4-49. You can see current channel name
is grey such as channel 1. Now you can select the channel you want to paste such as
channel 5/6/7. If you want to save current setup of channel 1 to all channels, you can click
the first box
“ALL”. Click the OK button to save current copy setup. Click the OK button in
the Encode interface, the copy function succeeded.
Figure 4-49
Redundancy
Redundancy function allows you to memorize record file in several disks. When there
is file damage occurred in one disk, there is a spare one in the other disk. You can use
this function to maintain data reliability and safety.

In the main menu, from Setting->Storage-> Schedule, you can highlight
redundancy button to enable this function.