Configuring Alarm 12
5
Configuring Alarm
This chapter introduces how to configure and customize alarm mode, and how to use the
camera as a gateway to connect compatible wireless node devices to the XVR.
Gateway function is available on select models.
For more detailed configuration, see the user's manual of XVR or the corresponding node
device.
Configuring Alarm Priority
5.1
In the OSD menu (see "4.3 Operating OSD Menu"), select
Advanced > Alert > Priority
.
If you select
Camera Setting
, the camera would perform siren and white light alarm as
configured in the camera.
If you select
XVR Setting
, the camera would perform siren and white light alarm as
configured in the XVR.
For more information about
XVR Setting
, see the XVR user's manual.
If the camera is not being used with the XVR, It is recommended to set the alarm priority to
Camera Setting
to ensure the best alarm accuracy.
Customizing Sound and Flashlight Alarm
5.2
This part is available only when the alarm priority is set to
Camera Setting
.
In the OSD menu (see "4.3 Operating OSD Menu"), select
Advanced > Alert
.
On the
Whitelight Alert
item, set it to
ON
, and then enter the item.
In
Mode
, You can select between
Normally On
or
Flash
.
If you select
Flash
, you can set the
Flash Frequency
from
Low
,
Medium
and
High
.
In the
Alert Duration
, you can adjust from 5 seconds to 30 seconds.
On the
Audio Alert
item, set it to
ON
, and then enter the item.
In the
Audio
item, you can select from the three audios.
In the
Volume
item, you can select from
Low
,
Medium
and
High
.
In the
Alert Duration
, you can adjust from 5 seconds to 30 seconds.
Connecting Node Device
5.3
This function is available on select models.
