6
Figure 3-1 for the details.
Step 4
Aim the decoration ring together with enclosure and dome body up to the pedestal, pull the
cable through the cable exit on the installation surface (Please skip this step if you want to use
side exit mode), screw the decoration ring and fix the enclosure and dome body on the
pedestal. Adjust the camera to an appropriate angle for monitoring according to the direction
which is shown in Figure 3-1.
Step 5
Connect the video output port of the device cable to the back-end encoding device, and
connect the power port of the device to power supply.
Step 6
After the image is displayed on the back-end encoding device, adjust the focusing nut which is
inside of zoom adjustment hole and focus adjustment hole by focusing tool to make the image
clear.
Now you have completed the device installation and cable connection.
You can use the terminal encode device to view the monitor video.