22
3.5.1 Sensor
Sensor includes three sub menus: basic, alarm handling and schedule.
①
Basic
Step1: enter into system configuration
alarm configuration
sensor
basic; refer to Fig 4-18:
Fig 4-18 alarm configuration-sensor-basic
Step2: enable sensor alarm, set the alarm type according to triggered alarm type. Two option: NO and NC.
Step3: user can setup all channels with same parameters, tick off “all”, then to do relevant setup.
Step4: click “default” button to resort default setting; click “apply” button to save the setting; click “exit”
button to exit current interface.
②
Alarm handling
Step1: enter into system configuration
alarm configuration
sensor
alarm handling; refer to Fig 4-19:
Fig 4-19 alarm configuration-sensor-alarm handling
Step2: select hold time, click Trigger button, and a dialog box will pop-up as Fig 4-20:
Fig 4-20 alarm handling-trigger
Step3: tick off Buzzer, there will be triggered buzzer alarm out;
Full screen alarm:
when triggered alarm, there will pop up full screen alarm;
To alarm out:
tick off the channel, there will be triggered alarm out in the designated channel. Click OK
button to save the setting; click Exit button to exit the current interface.
To record:
tick off recoding channels, it will record the camera when alarm triggered. Click OK button to
save the setting; click Exit button to exit the current interface.
To P.T.Z:
set linked preset and cruise for alarm. User can select any channel and multi channels as linked