Dahua F4X5, Operation Manual

Page: 75 / 98

Dahua Network Speed Dome Web3.0 Operation Manual
71
Parameter Note
Enable Face
Detect
Check it to enable face detect alarm.
Working
Period

This function becomes activated in the specified periods.

There are six periods in one day. Please draw a circle to enable corresponding
period.

Select date. If you do not select, current setup applies to today only. You can
select all week column to apply to the whole week.

Click OK button, system goes back to motion detection interface; please click
save button to exit.
Note: User can set via dragging mouse while not releasing left mouse.
Enable Face
Enhancement
Check it and enable face enhancement function.
Alarm Face
Amount
It is to set the min face amount to activate alarm, select from 1~35.
Record
Check it and the system auto activates alarm record once local alarm occurs.
Meanwhile, set the record period in the “Storage > Schedule” and select auto record
in the record control interface.
Record Delay
System can delay the record for specified time after alarm ended. The value ranges
from 10s to 300s.
Send Email
If you enabled this function, the system can send out email to inform the user when
alarm occurs. User can set email address in “Network>SMTP”.
PTZ

Here you can set PTZ movement when alarm occurs. Such as go to preset x
when there is an alarm.

The event type includes: preset, tour and pattern.
Snapshot
Check it and the system can auto activate alarm snapshot when alarm occurs. You
shall set snapshot period in Storage>Schedule.
Target Filter
Check enable, click “Draw”, and you can draw the size model of filter target for the
rule in the scene; click “Clear” to delete all the target filter models which have been
drawn.
4.4.4 Abnormality
Abnormality includes SD Card (Figure 4-57 to Figure 4-59), network (Figure 4-60 to Figure 4-61), and
Unauthorized Access (Figure 4-62).
Note: Only device with SD card function has these three statuses: No SD card, capacity warning, and
SD card error.