ESS Series
User’s Manual
37
In Figure 3-3, click add button, you can see the following interface. See Figure 3-5.
After input new user information such as user name, user type, user type, please click save
button. System goes back to user management interface. Otherwise, you can see the
corresponding dialogue box.
Figure 3-5
3.2.3.3
Delete User
Login the system as the administrator, select the delete button
after the corresponding user,
system pops up a dialogue box to remind you that you are going to delete a user. Click O.K
button, all the information of current user will be deleted completely. You cannot use it to login
and operate.
Important
System can not delete an account if it has been set as a valid share account.
3.2.4 Guide
After you logged in as the system administrator, from system to guide, you can go to Guide
interface. Guide function is to help you get familiar with this device as soon as possible. You can
follow the tip in each interface and then modify as you need. You can just click next button to go
on.
Please refer to chapter 4.1 for detailed information.
3.2.5 Enclosure
After you logged in as the system administrator, in Enclosure interface, you can view main host
and disk array enclosure information, temperature, power voltage status, fan status.
Here you can view disk array enclosure version if you want to update its software. You can also
go to this interface to check the update operation is successful or not. See Figure 3-6.
Please refer to the following sheet for detailed information.
