6
Power on
1.4
The cover of the Station has static electricity, which might cause electric shock. To avoid electric
shock, make sure the Station is well grounded.
Connect the power cable and network cable.
Step 1
Press the power button.
Step 2
The whole process will take a period of time. Please be patient.
Device Connection
1.5
1.5.1
Connecting Control Module and Data Collection Module
You can connect 4 data collection modules to the control module at most.
For the installation details, see the instructions on the positioning map.
Fix the control module on the wall.
Step 1
Stick the positioning map of data collection module on the wall.
Step 2
Fix the data collection module according to the instruction on the positioning map.
Step 3
1.5.2
Connecting Body Camera and Data Collection Module
After starting the Station, connect body cameras to the Station, and then you can collect data from
body cameras and recharge them.
Make sure that the connection of body cameras and data collection module is proper, and the body
cameras are placed in slots correctly. If the body cameras are not placed in slots properly, the
cameras might drop when docks open, or the docks cannot be opened.
The slots are special for MPT220 body camera by default. If you want to use for MPT210 body camera,
use the separate slot in the accessories package.
Open the dock through the touch screen or the key, and then take out the data cable.
Step 1
Do not drag the data cable too harsh. Otherwise, it might result in invalid spring or
loosening port connection!
Summary of Contents for EEC300D8-N1
Page 1: ...Data Collection Station Quick Start Guide V1 0 1...
Page 6: ...2 Product Appearance 1 2 1 2 1 Control Module Front panel and rear panel Figure 1 1...
Page 13: ...9 Data collection MPT220 slot Figure 1 9 Data collection MPT210 slot Figure 1 10...