Installation and Configuration
3
Installation with 86 box
Figure 2-2
2.1.3 Desktop Installation
Install the device with bracket on the desktop, which only applies to handset VTH. Take
VTH5221E-H as an example.
With two M3×6 cross recessed countersunk head screws, tighten the metal bracket
Step 1
onto the top two nuts of desktop bracket.
Connect cables. For details, see "1 Rear Panel Port."
Step 2
Thread the cable through wire outlet.
Step 3
Put the handset VTH along slot at the top of metal bracket, and install it into the
Step 4
bracket.
