96
Isotherm Filter
Select the
On
check box and set
per Limit Threshold
and
Lower Limit
Threshold
on your own needs.
This function is aimed at diminishing false alarms caused by waving
water.
Tracking Overlap
Rate
When overlap rate of an object at this moment and at earlier time is
smaller than the rate you have set, this object can be detected and an
alarm is triggered.
Valid Tracking
Distance
Only when an object’s moving distance is larger than valid tracking
distance you have set, this object can be detected and an alarm is
triggered.
Valid Tracking Time
Only when an object’s moving time is larger than valid tracking time you
have set, this object can be detected and an alarm is triggered.
Click
Save
.
Step 5
4.4.3
Call Detection
Configure call detection to help you monitor the calling behavior at locations such as gas stations.
Once a calling is detected, alarm and email will be triggered to alert phone callers and inform you to
take actions.
4.4.3.1
Configure Smart Plan
Select a preset for which you can enable the Call Detection first. Then you can configure detailed
settings.
Go to the
Live
interface and select
Preset
in
PTZ function
box. Then select a preset number and
click
to examine whether or not it’s the scene where you want to monitor
calling behavior. See Figure 4-49. If not, go to
Setting > PTZ > Function > Preset
to add a new
preset.
PTZ function
Figure 4-49
Go to
Setting > Smart Thermal > Smart Plan.
The
Smart Plan
interface is displayed.
Step 1
