Dahua DHI-NVR5208-4KS2 User Manual Download

Page: 278 / 361

Local Basic Operation 267



Manual check: Click Manual Check.

The system starts checking the new versions. After checking is completed, the check

result is displayed.



If the "It is the latest version" text is displayed, you do not need to upgrade.



If the text indicating there is a new version, go to the step 3. .

Step 3 Click

Upgrade now

to update the system.

4.10.4.4.3

Uboot Upgrading



Under the root directory in the USB storage device, there must be "u-boot.bin.img" file and

"update.img" file saved, and the USB storage device must be in FAT32 format.



Make sure the USB storage device is inserted; otherwise the upgrading cannot be

performed.

When starting the Device, the system automatically check whether there is a USB storage

device connected and if there is any upgrade file, and if yes and the check result of the upgrade

file is correct, the system will upgrade automatically. The Uboot upgrade can avoid the situation

that you have to upgrade tTFTP when the Device is halted.

4.11 File Backup

You can back up the record file to the UBS device.

Step 1 Connect USB burner, USB device or portable HDD to the device.

Step 2 Select

Main menu

BACKUP

, the

Backup

interface is displayed. See Figure 4-201.

Figure 4-201

Summary of Contents for DHI-NVR5208-4KS2










































































































































































































































































































































































Search results

Summary of Contents for DHI-NVR5208-4KS2

Reviews:

Related manuals for DHI-NVR5208-4KS2

Brands by name

Popular brands

Dahua DHI-NVR5208-4KS2, User Manual

Search results

Summary of Contents for DHI-NVR5208-4KS2

Reviews:

Related manuals for DHI-NVR5208-4KS2

Brands by name

Popular brands