Dahua DHI-KTP01, Quick Start Manual

Page: 16 / 28

Installation and Configuration
8
Tap Cancel , you need to configure parameters for the indoor monitor (VTH) according
to your needs.
All intercoms displayed
Select an uninitialized device.
The
Device Init interface is displayed. See Figure 2-10.

Initialization of all intercoms must be done on the indoor monitor (VTH); otherwise
the quick configuration might fail.

If no device is uninitialized, tap Next to go to the configuration interface. See
Figure 2-11.
Device Init
Enter password, confirm password, and email for the device you are to initialize.
Tap OK .
The intercom list interface is displayed again. See Figure 2-11.