Dahua DH-XVR5416L-X, User Manual

Page: 148 / 359

Local Configurations 132
5.7.1 Enabling Record Control

Manual recording operation requires the user have the permission to access STORAGE
settings.
 Check to ensure the HDD installed in the Device has been formatted properly.
To enter the record control interface, do the following:
Right-click on the live view screen, the shortcut menu is displayed. On the shortcut Step 1
menu, select Manual > Record Control .
The RECORD interface is displayed, see Figure 5-94.
Figure 5-94
Configure the settings for the record control parameters. See Table 5-31. Step 2
Parameter Description
Channel
Displays all the analog channels and the connected digital channels.
You can select a single channel or select All .
Record status
Auto : Automatically record according to the record type and

recording time as configured in the recording schedule.
Manual : Keep general recording for 24 hours for the selected

channel.
Stop : Do not record.

Snapshot status
Enable or disable the scheduled snapshot for the corresponding
channels.
Table 5-31
Click Apply . Step 3