Dahua DH-XVR5416L-X User Manual Download Page 114

Page: 114 / 359

Local Configurations

Click

Apply

to save the settings.

Step 3

Click

Copy

to copy the settings to other channels.

5.4.2 Working with PTZ Control Panel

PTZ control panel performs the operations such as directing camera in eight directions,

adjusting zoom, focus and iris settings, and quick positioning.

Basic PTZ Control Panel

Right-click on the live view screen and then select

PTZ

. The PTZ control panel is displayed.

See Figure 5-57.

Figure 5-57

The functions with buttons in gray are not supported by the system.

Parameter

Description

Speed

Controls the movement speed. The bigger the value is, the faster the

movement will be.

Zoom

: Zoom out.

: Zoom in.

Focus

: Focus far.

: Focus near.

Iris

: Image darker.

: Image brighter.

PTZ movement

Supports eight directions.

Summary of Contents for DH-XVR5416L-X








































































































































































































































































































































































Search results

Summary of Contents for DH-XVR5416L-X

Reviews:

Brands by name

Popular brands

Dahua DH-XVR5416L-X, User Manual

Search results

Summary of Contents for DH-XVR5416L-X

Reviews:

Brands by name

Popular brands