Configuring Devices
20
Parameter
Description
number you planned for the VTH.
If there are master VTH and extension VTH being used, the
short number of the master VTH should be "room number#0",
and the extension VTH to be #1, #2, and #3 and so on.
Register Password
Leave to the default.
Register Type
Click
OK
to finish configuration.
Step 5
Do the operation above repeatedly to add more VTH devices in the network.
5.1.2 Configuring VTH
5.1.2.1 Initializing VTH
Configure VTH password and link to your Email.
Password: it can be used to go to the engineering interface, mostly for admin people or
engineers.
Email: it can be used to reset the password.
Power up the VTH.
Step 1
The
WELCOME
sign is displayed, and then the
Device Init
interface. See Figure 5-12.
Device initialization
Figure 5-12
Enter and confirm the password, and then enter the Email.
Step 2
Tap
OK
.
Step 3
The main interface is displayed. See Figure 5-13.
