Web Interface
90
Click
File
, and then select the .csv file you need.
Step 3
Click
Upload
.
Step 4
Enter the password for the Web interface, and then click
OK
.
Step 5
The success notice is displayed.
Face Management
7.14
This section introduces how to configure face recognition and how to manage face data.
7.14.1 Configuring Face Recognition
This section introduces how to configure face recognition threshold, anti-false threshold, and
face recognition angle.
Select
System Config > Face Management > Face Recognition
.
Step 1
The
Face Recognition
interface is displayed. See Figure 7-48.
Face recognition
Figure 7-48
Configure face recognition parameters. For the detailed description. See Table 7-19.
Step 2
Table 7-19 Face recognition parameter description
Parameter
Description
Face Threshold
The bigger the value is, the more similar the target and the saved face
data is required to open the door.
Anti False
Threshold
The bigger the value is, the less the chance that the system defines a
target as human face, hence the more accurate it will be.
Face Recognition
Angle
The bigger the value is, the bigger the angle that the target is allowed to
turn his face during recognition.
Flash Light
Brightness
The brightness of the fill light when providing light to face recognition.
Click
OK
to finish configuration.
Step 3
7.14.2 Face Management
You can add, delete, import, and export face data.
The VTO can save 10,000 faces at most.
