6
It needs more than 3 people to install the device, pay attention to protect the lens during
installation.
It is not allowed to power on the device before fixing the device on the installation desktop,
otherwise, the device may fall over and cause damage to the upper component especially
the lens during power on self test of the device.
Figure 3-1
Figure 3-2
The installation steps are shown as follows:
Step 1
Use the inner hex wrench in the PTZ accessories bag to loosen the screws on both sides of the
PTZ housing and demount the housing bracket.
Step 2
Use the screws in the housing accessories bag to install the housing bracket which is demounted
in step 1 on the bottom of the housing.
Step 3
Install the housing with bracket on the top of the PTZ according to the direction shown on PTZ,
use inner hex wrench to fix the bracket well.
Step 4
