10
W icfg 18:00:22 71/icfg_commit_tftp_load_and_trigger#2695: Warning: TFTP get
bringup-config: Operation timed out.
Press ENTER to get started
Username: admin
Password:
SWITCH#
Enter corresponding command to configure the device or check device operating
status, and you can enter ? anytime if you need help.
4.2 Device Factory Default Configuration
You can log in to Web interface of the device via the following IP address.
Username and password can be applied to log in to Web interface via Console port.
Table 4-1 Device factory default
Parameter
Note
IP address
192.168.1.110
Username
admin
Password
● iLinksView is enabled by default, and the default username is admin, the default password
is lt_91_il_02_nmp.
● When using the iLinksView to manage the device, note that the username and password
must be the same as that you have set in the iLinksView, otherwise the iLinksView cannot
discover the device.
4.3 VLAN Configuration
VLAN (Virtual Local Area Network) is frequently used during actual application; it is divided into
multiple network basics internally. VLAN is to organize several devices into one network
logically, regardless of the physical location of the devices. Each VLAN is a logical network,
which is equipped with all functions and attributes of traditional physical network. Each VLAN is
a broadcast domain; broadcast packet can only be forwarded within one VLAN, not across the
VLAN.
VLAN Based on Port
VLAN based on port means that one switch can realize the division of logical working groups
via controlling interoperability of between two and among several ports. Dividing port VLAN
reasonably can greatly improve network security and bandwidth use ratio, besides it reduces
the probability of broadcast storm. The model supports 4094 VLAN; it needs to select a VLAN