Installation
5
3
Installation
Installing the Device
3.1
The device supports standard rack-mount.
Install the rackmount kit on both sides of the switch. See Figure 3-1.
Rack-mount
Figure 3-1
Wiring
3.2
3.2.1 Ethernet Port
Ethernet port pin No.
Figure 3-2
10/100/1000 Base-T Ethernet port adopts standard RJ-45 port. Equipped with self-adaptation
function, it can be automatically configured to full duplex/half -duplex operation mode, and
supports MDI/MDI-X self-recognition function of the cable, which means it can use cross-over
cable or straight-through cable to connect terminal device to network device.
Pin description
Figure 3-3
