Dahua DH-PFS3110-8ET-96 Quick Start Manual Download Page 2

 

Foreword 

General 

This manual mainly introduces the hardware, installation, and wiring steps of the 4/8-port 
unmanaged hardened switch (hereinafter referred to as "the device"). 

Safety Instructions 

The following categorized signal words with defined meaning might appear in the manual. 

Signal Words 

Meaning 

 

Indicates a high potential hazard which, if not avoided, will result in 

death or serious injury. 

 

Indicates a medium or low potential hazard which, if not avoided, 

could result in slight or moderate injury. 

 

Indicates a potential risk which, if not avoided, could result in 

property damage, data loss, reductions in performance, or 
unpredictable results. 

 

Provides methods to help you solve a problem or save time. 

 

Provides additional information as a supplement to the text. 

Revision History 

Version 

Revision Content 

Release Time 

V1.0.2 

Updated long distance description. 

August 2023 

V1.0.1 

 

Updated 

Important Safeguards and Warnings

 

Updated 

1.1 Introduction

 

Updated 

1.2 Features

 

Updated 

2.1 Front Panel

, added Figure 2-2. 

 

Updated 

2.2 Side Panel

, added Figure 2-4 and 

Table 2-3. 

 

Updated Figure 4-1 GND port. 

July 2021 

V1.0.0 

First release. 

April 2021 

Privacy Protection Notice 

As the device user or data controller, you might collect the personal data of others such as their face, 
fingerprints, and car plate number. You need to be in compliance with your local privacy protection 
laws and regulations to protect the legitimate rights and interests of other people by implementing 
measures which include but are not limited: Providing clear and visible identification to inform 
people of the existence of the surveillance area and provide required contact information. 

About the Manual 

  The manual is for reference only. Slight differences might be found between the manual and the 

product. 

  We are not liable for losses incurred due to operating the product in ways that are not in 

compliance with the manual. 

Summary of Contents for DH-PFS3110-8ET-96


















Reviews: