User’s Manual
54
3.5.3
Configuring Destination
This section introduces the configuration of the storage method for the recorded videos and
snapshots.
3.5.3.1
Path
You can select different storage paths for the recorded videos and snapshots according to event
type. You can select from SD card, FTP and NAS.
Local
is displayed only on models that support SD card.
Step 1 Select
Setting > Storage > Destination > Path
.
Path
Step 2 Select the storage method that you need for the recorded videos and snapshots of
different types.
Table 3-28
Description of path parameters
Parameter
Description
Event Type
Select from
Scheduled
and
Alarm
.
Local
Save in the SD card.
FTP
Save in the FTP server.
NAS
Save in the NAS (network attached storage).
Step 3 Click
Save
.
Step 4 Configure other path parameters on
Destination
,
FTP
or
NAS
interface. For details,
see "3.5.3 Setting Destination", "3.5.3.3 FTP" or "3.5.3.4 NAS".
3.5.3.2
Local
Display the information of the local SD card. You can set it as read only or read & write; you can
also hot swap and format SD card, and reset password for it.
● Normal mode: The new SD cards and the cards whose password are cleared successfully
show normal mode. The SD cards of this status do not support authorization operation.
