Dahua DH-PFM885-I, Quick Config Manual

Page: 6 / 13

3 Device Config
Precondition
Please refer to the cable connection figure to connect the device to mainframe and power it on.
Operation Steps
It is to configure elevator room and elevator car via the following steps, normal communication can be
realized after config is completed.
Configure Elevator Car Device (Access Point Mode)
Step 1
Configure the computer IP address as the address which is not used in the LAN, such as 192.168.1.180.
Figure 3-1
Step 2
Use browser to log in the device, the default IP address of DH-PFM885-I access point is 192.168.1.35.
The username is root, password is admin;