2
2
Housing Installation Instruction Guide
2.1
Lock/Unlock Housing
You can use screwdriver to fix or loosen the two M4 cross pan head screws on both sides of the
housing to lock or unlock the housing. See Figure 2-1.
Figure 2-1
2.2
Camera Installation
Step 1: Take the camera bracket from the housing.
Step 2: Fix the camera on the camera bracket. See Figure 2-2
Step 3: Secure the camera bracket on the case. See Figure 2-3
Note
The camera lens shall be as near as to the front end of the bracket (Recommended distance is
1-2mm.) in case it affect the lens view angle. See figure 2-4.
Figure 2-2
