background image

 

Foreword 

General 

This manual introduces the installation, functions and operations of the 16/24-port ePoE switch 
(hereinafter referred to as "the Device"). Read carefully before using the device, and keep the manual 
safe for future reference. 

Safety Instructions 

The following categorized signal words with defined meaning might appear in the manual. 

Signal Words 

Meaning 

 

Indicates a high potential hazard which, if not avoided, will result 

in death or serious injury. 

 

Indicates a medium or low potential hazard which, if not 

avoided, could result in slight or moderate injury. 

 

Indicates a potential risk which, if not avoided, could result in 

property damage, data loss, lower performance, or 

unpredictable result. 

 

Provides methods to help you solve a problem or save you time. 

 

Provides additional information as the emphasis and 

supplement to the text. 

Revision History 

Version 

Revision Content 

Release Time 

V1.0.1 

Updated the features, the image and description of the 
front panel. 

May 2022 

V1.0.0 

First release. 

April 2022 

Privacy Protection Notice 

As the device user or data controller, you might collect the personal data of others such as their face, 
fingerprints, and license plate number. You need to be in compliance with your local privacy 
protection laws and regulations to protect the legitimate rights and interests of other people by 
implementing measures which include but are not limited: Providing clear and visible identification 
to inform people of the existence of the surveillance area and provide required contact information. 

About the Manual 

  The manual is for reference only. Slight differences might be found between the manual and the 

product. 

  We are not liable for losses incurred due to operating the product in ways that are not in 

compliance with the manual. 

  The manual will be updated according to the latest laws and regulations of related jurisdictions. 

For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or visit 
our official website. The manual is for reference only. Slight differences might be found between 

Summary of Contents for DH-LR2218-16ET-240

















Reviews: