Quick Start Guide
1
1 Introduction
1.1 Cable
● Cable type might vary with different devices, and the actual product shall prevail.
● Waterproof all the cable joints with insulating tape and waterproof tape to avoid short circuit
and water damage. For the detailed operation, see the
FAQ Manual
.
Figure 1-1 Cables
For more information about cable ports, see Table 1-1.
Table 1-1 Cable information
No.
Port name
Description
1
Power input
Inputs 12V DC power. Be sure to supply power as
instructed in the manual.
Device abnormity or damage might occur if power is not
supplied correctly.
2
Power output
Supplies 12V DC 2W power for external devices.
3
Alarm I/O
Includes alarm signal input and output ports, and the
number of I/O ports might vary on different devices. For
detailed information, see Table 1-2.
4
RS-485
Controls external PTZ and so on.
● White and yellow: RS-485 A.
● Orange: RS-485 B.
5
Ethernet port
Connects to network with network cable.
6
Audio input
Connects to sound pickups to receive audio signal.
Audio input is available on select models.
7
Audio output
Connects to speaker to output audio signal.
Audio output is available on select models.
For more information about I/O port, see Table 1-2.
