Dahua DH-IPC-HDW3449HP-AS-PV-0280B, Quick Start Manual

Page: 9 / 21

Quick Start Guide
4
2 Network Configuration
Device initialization and IP setting can be finished with the "ConfigTool" or on web interface. For
more information, see the
Web Operation Manual .
●
Device initialization is available on select models, and it is required at first-time use and after
device is being reset.
●
Device initialization is available only when the camera (whose IP address is 192.168.1.108 by
default) and the PC stays in the same network segment.
●
Plan usable network segment properly to connect the device to the network.
●
The following figures and interfaces are for reference only, and the actual product shall prevail.
2.1 Initializing Device
Step 1 Double-click "ConfigTool.exe" to open the tool.
Step 2 Click .
The Modify IP interface is displayed.
Figure 2-1 Modify IP
Step 3 Click
Search setting
.
The Setting interface is displayed.
Step 4 Enter the start IP address and end IP address of the network segment in which you want to
search devices, and then click
OK .
All the devices found in the network segment are listed.