Dahua DH-IPC-EBW81242N-AS-S2, Quick Start Manual

Page: 10 / 21

Quick Start Guide
4
2
Network Configuration
Device initialization and IP setting can be finished with the "ConfigTool" or in web interface. For more
information, see the
WEB operation manual .

Device initialization is available on select models, and it is required at first use and after device is
being reset.

Device initialization is available only when the IP addresses of the device (192.168.1.108 by
default) and the PC stays in the same network segment.

Planning useable network segment properly to connect the device to the network.

The following figures and interfaces are for reference only, and the actual product shall prevail.
Initializing Device 2.1
Double-click "ConfigTool.exe" to open the tool. Step 1
Click . Step 2
The Modify IP interface is displayed. See Figure 2-1.
Modify IP interface Figure 2-1
Click
Search setting
. Step 3
The Setting interface is displayed.
Enter the start IP and end IP of the network segment in which you want to search devices, Step 4
and then click
OK
.
All the devices found in the network segment are listed.
Select one or several devices which
Status
is
Uninitialized
, and then click
Initialize
. Step 5