IR Speed Dome Installation 11
Wrong way for moving the speed dome
Figure 2-14
2.6.2.2 Cable Connection
Buckle the safety hook of the speed dome on the quick mounting connector, and connect the
cables reserved on the wall-mounted bracket with the corresponding cables of the speed dome
as you need. Then twine the cable connection with insulated rubber tape to ensure waterproof.
Make sure the wire diameter of the cable connected to RS-485 control cable is not too big.
Otherwise, the control effect might be bad. See Appendix 2 for details about RS-485 cable.
Cable connection
Figure 2-15
