Dahua ARD912-W2, User Manual, Page: 16 / 21

User’s Manual
11
6 Configuration
You can view and edit general information of the water leak detector.
6.1 Viewing Status
On the hub screen, select a water leak detector from the peripheral list, and then you can view the
status of the water leak detector.
Table 6-1 Status
Parameter Value
Temporary Deactivate
The status for whether the functions of the repeater are enabled or
disabled.
●
: Enable.
●
: Disable.
Signal Strength
The signal strength between the hub and the water leak detector.
●
: Low.
●
: Weak.
●
: Good.
●
: Excellent.
●
: No.
Battery Level
The battery level of the water leak detector.
●
: Fully charged.
●
: Sufficient.
●
: Moderate.
●
: Insufficient.
●
: Low.
Online Status
Online and offline status of the water leak detector.
●
: Online.
●
: Offline.
Water Leak Status
The status of water leak.
●
: Normal.
●
: Alarm.
Transmit through Repeater
The status of whether the water leak detector forwards its
messages to the hub through the repeater.
Program Version The program version of the water leak detector.
6.2 Configuring the Water Leak Detector
On the hub screen, select a water leak detector from the peripheral list, and then tap to
configure the parameters of the water leak detector.