Parameter
Note
Period
Within period, intrusion causes alarm. See Ch 6.3.1.1 step 2.
Anti-dither
In set period, only record alarm event once.
Type
According to IPC alarm output
’s trigger method, select NO or
NC.
Chart 6-17
Step 3. Click OK.
6.3.2.2
IPC Offline Alarm
When IPC and Field Surveillance Unit disconnect, trigger alarm.
Step 1. Select Setup>Event>Alarm>IPC Offline Alarm. See Figure 6-45.
Figure 6-45
Step 2. Set parameter.
Step 3. Click OK.
6.3.3
Abnormality
When device status is detected to be same with pre-set event type, trigger alarm.
6.3.3.1
HDD
Detect Field Surveillance Unit HDD status, if it is the same with pre-set event type, trigger alarm.
Step 1. Select Setup>Event>Abnormality>HDD, see Figure 6-46.
Summary of Contents for ARC6416C series
Page 1: ...1 Video Field Surveillance Unit User s Manual V 1 0 0 For ARC6416C series...
Page 8: ...Figure 1 1...
Page 23: ...Figure 4 5 4 3 3 Add Peripheral Protocol Step 1 Click 3 Protocol Management see Figure 4 6...
Page 105: ...Figure 7 3 Click to view detailed alarm of each peripheral see Figure 7 4 Figure 7 4...