Dahua ARC6416C series, User Manual

Page: 38 / 117

Parameter Note
Record Check, select snapshot channel, when alarm occurs, link this channel
record. See Ch 6.4.2.
Record
Delay When alarm ends, record delays for a while before it stops.
Snapshot Check, select snapshot channel, when alarm occurs, link this channel
snapshot, snapshot 20 pics each time. See Ch 6.4.3.
Alarm
Output Check, select alarm output channel, when alarm occurs, link alarm output
port peripheral device.
Alarm Delay When alarm event ends, alarm delays for a while before it stops.
Voice
Prompts Check, in dropdown list select audio file, when alarm occurs, link this
audio file. See Ch 6.5.2.
Buzzer Check, when alarm occurs, buzzer alarms.
Siren Check, when alarm occurs, it enables siren.
Message Check, in dropdown list select alarm group, when alarm occurs, it sends
message to user in this group. See Ch 5.5 .
Mail Check, in dropdown list select alarm group, when alarm occurs, it sends
mail to user in this group. See Ch 5.5 .
Chart 5-3
Step 5. Click OK.
5.5 Receive Alarm
You can set receiving alarm contact, and the system provides 3 receiving alarm group setup.
Select Environment Config>Receive Alarm, see Figure 5-10.
Figure 5-10