Dahua ARC6416C series User Manual Download Page 100

Page: 100 / 117

Figure 6-66

Default

Select the configuration item, click "Default", confirm and restart the system, the system will

restore the selected parameters to default values.

Check "All" to select all configuration items.

Factory Reset

Click "Factory Reset" to confirm that the system will reboot and restore all the parameters to the

factory defaults.

6.5.8

Upgrade

6.5.8.1

System Upgrade

Warning:



During the upgrade process, do not power off, disconnect, restart, or shut down the device.



Please select the correct upgrade file, upgrade the wrong program may cause the device

does not work properly.

Select Setup>System>Upgrade, see Figure 6-67. Click Browse, select upgrade file (.bin), click

Upgrade to complete upgrading.

After upgrade is complete, WEB page will restart.

Figure 6-67

6.5.8.2

USB Upgrade

Step 1. Name the bin file for upgrading to AutoUpDate.bin and copy it to a USB disk.

Step 2. In the USB disk, create a file named AutoUpDatelicence.txt with the following contents:

Username = admin

Password = admin

Summary of Contents for ARC6416C series






















































































































Search results

Summary of Contents for ARC6416C series

Reviews:

Related manuals for ARC6416C series

Brands by name

Popular brands

Dahua ARC6416C series, User Manual

Search results

Summary of Contents for ARC6416C series

Reviews:

Related manuals for ARC6416C series

Brands by name

Popular brands