Intelligent Operation 28
Select remote device in the device tree in the left.
Step 2
Select
AI Plan
>
Face Recognition
.
Step 3
Face Recognition
interface is displayed. See Figure 6-13.
Face recognition
Figure 6-13
Click
AI by Camera
or
AI by Device
, and then click
to enable intelligent
Step 4
function.
Click
Deployment Time
to select schedule from the drop-down list.
Step 5
After setting deployment period, system triggers actions when there is a motion
detection alarm in the specified period.
Set stranger mode.
Step 6
It is to enable stranger mode. Once the face comparison similarity is lower than the
specified value, system triggers an alarm.
1) Click
to enable stranger mode.
The
Stranger control mode
interface is displayed. See Figure 6-14.
Stranger control mode
Figure 6-14
2) Set parameters. For details, refer to Table 6-2.
Table 6-2 Stranger control mode description
Parameter
Description
AI alarm rule
Click
to set alarm rule box color.
Show feature panel
Check
to enable features panel function. System displays stranger
panel once there is an alarm.
3) Click
Actions
to set alarm actions. Refer to
user’s manual for detailed
information.
Summary of Contents for 8-HDD Series
Page 1: ...Intelligent Video Surveillance Server Quick Start Guide V2 1 0 ...
Page 11: ...The Grand Tour 4 Dimensions 2 3 Dimensions with LCD mm inch Figure 2 4 ...
Page 12: ...The Grand Tour 5 Dimensions without LCD mm inch Figure 2 5 ...
Page 16: ...Hardware Installation 9 Connection diagram Figure 3 2 ...