7
2.4.2.4 Speed Dome GND Cable Connection
Connect the YELLOW/GREEN power cable to the lightning protection device, and make sure
the lightning protection device is well grounded.
2.4.3 Installing the Speed Dome
To install the speed dome, do the following:
Buckle the safety hook, and route the cables into the wall-mounted bracket.
Align the speed dome flange with that on the quick mounting connector, and push the
speed dome to the quick mounting connector.
Screw the M6*14 stainless screw with spring washer on the quick mounting connector
into the
Ф 6.5
hole on the speed dome flange, and screw another two M6*14 stainless
screws on the speed dome flange. Secure the three screws with the Allen wrench. See
Figure 2-16.
Installing the speed dome
Make sure three M6*14 stainless screws are firmly screwed, and the speed dome is
firmly secured. See Figure 2-17.