System Configurations
54
Call
Figure 4-48
Enter a number in the input box, such as 1. Click
Preset
to call the preset point 1.
It will be called successfully after you have set preset point.
Call methods of scan, tour and pattern are the same as that of preset point. Refer to "4.5.2
Settings" for details.
4.5.2 Settings
4.5.2.1 Settings of Preset Point
Turn the camera to required position with the joystick or direction button.
Step 1
Select
Preset
.
Step 2
Enter a preset point value in
Preset
input box, such as
1
.
Step 3
Click
Settings
. Preset point 1 is set successfully.
Step 4
4.5.2.2 Settings of Tour
Select
Tour
.
Step 1
Enter tour route value in
Tour No.
input box.
Step 2
Enter a preset point value in
Preset
input box, and then click
Add Preset
to add a
Step 3
preset point to the tour route.
Multiple preset points can be added.
