background image

 

 

1.4  Disclaimer  

 

This user guide has been compiled with great care and the information it contains has been 

thoroughly reviewed and verified. The text was complete and correct at the time of printing. This 

guide may be periodically updated to reflect changes to the product or to correct previous 

information and the content of this guide can change without notice. If you encounter an error or 

have any questions regarding the contents of this guide, contact customer service for the latest 

documentation and supplementary information. Dahua accepts no liability for damage resulting 

directly or indirectly from faults, incompleteness, or discrepancies between this guide and the 

product described. Dahua is not liable for any loss caused by installation, operation, or 

maintenance inconsistent with the information in this guide. 

 

Video loss is inherent to all digital surveillance and recording devices; therefore Dahua cannot be 

held liable for any damage that results from missing video information. To minimize the 

occurrence of lost digital information, Dahua recommends multiple, redundant recording systems, 

and adoption of backup procedure for all data. 

 

Contact the supplier or customer service if you encounter any issue while using this unit.  

Summary of Contents for 42C212TNI





















Reviews: