Main Function Description
38
5.3
AcquisitionControl
In this property, you can set the image acquisition mode, trigger mode and exposure time etc., as shown
in Figure 5-3; please refer to Sheet 5-4 for detailed parameter settings.
Figure 5-3 Acquisition Control
Sheet 5-4 Acquisition Control - Parameter Explanation
Parameter
Explanation
AcquisitionMode
Image acquisition mode
:
SingleFrame: acquires one frame at a time and stops to
capture frames automatically when finished.
MultiFrame:
acquires
frames
specified
by
AcquisitionFrameCount and stops to capture frames
automatically when finished.
Continue: acquires frames continuously until an Acquisition
Stop signal is given to stop to capture frames.
AcquisitionStart
SDK starts / stops to capture frames.
AcquisitionStop
not be improved when Decimation is on in CCD type.