Dahua Technology XVR4 Series User Manual Download

Page: 266 / 330

Local Configurations

253

5.19.2 Configuring the Recording and Snapshot Schedule

The system starts recording and taking snapshot according to the configured schedule. For

details, see "5.1.4.9 Configuring Recorded Video Storage Schedule" and "5.1.4.10 Configuring

Snapshot Storage ScheduleConfiguring Snapshot Storage Schedule."

5.19.3 Configuring HDD Manager

You can view the HDD information, format HDD, and configure the HDD type through HDD

manager.

Select

Main Menu > STORAGE > HDD MANAGER

Step 1

The

HDD MANAGER

interface is displayed. See Figure 5-226.

In the table, you can view the information of current HDD, such as device name, HDD

type, status, total space and free space, and serial number of the HDD port.

Figure 5-226

Configuring the settings for the HDD manager.

Step 2



HDD type setting: In the

Type

list, select

Read/Write

Read-Only

Redundant

and then click

Apply

to save the settings.



HDD format: Select the HDD that you want to format, click

Format

, in the pop-up

message, click

to start formatting, and then following the onscreen message to

complete formatting.

Summary of Contents for XVR4 Series











































































































































































































































































































































Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands

Dahua Technology XVR4 Series, User Manual

Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands