Dahua Technology XVR4 Series User Manual Download

Page: 114 / 330

Local Configurations

101

Parameter

Description

each channel window in the live view screen.

In the

Channel Title

box, enter the name for the selected channel.

Table 5-26

Click

Apply

to complete the settings.

Step 3

Click

Copy

to copy the settings to other channels.

5.5.5 Configuring Covered Area Settings

Select

Main Menu > CAMERA > OVERLAY > Cover-Area

Step 1

The

Cover-Area

interface is displayed. See Figure 5-67.

Figure 5-67

Configure the settings for the covered area parameters. See Table 5-27.

Step 2

Parameter

Description

Channel

In the

Channel

list, select the channel that you want to configure the

settings for.

Preview

Preview: Select the

Preview

check box to apply the configured



covered block to the selected channel window in the live view

screen.

Record: Select the

Record

check box to apply the configured



Summary of Contents for XVR4 Series











































































































































































































































































































































Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands

Dahua Technology XVR4 Series, User Manual

Search results

Summary of Contents for XVR4 Series

Reviews:

Related manuals for XVR4 Series

Brands by name

Popular brands