Local Configurations
108
Figure 5-71
Configure the settings for the snapshot parameters. See Table 5-25.
Step 2
Parameter
Description
Manual Snap
In the
Manual Snap
list, select how many snapshots you want to take
each time.
Channel
In the
Channel
list, select the channel that you want to configure the
settings for.
Mode
In the
Mode
list, you can select
General
,
Event
, or
Human Face
as
the event type for which you want to take a snapshot.
General
: The snapshot is taken during the scheduled period.
Event
: The snapshot is taken when there is an alarm event
occurs, such as motion detection event, video loss, and local
alarms.
Human Face:
The snapshot is taken when the face is detected.
The face detection function is support only with the Channel 1.
Image Size
In the
Image Size
list, select a value for the image. The bigger the
value is, the better the image will become.
Image Quality
Configures the image quality by 6 levels. The higher the level, the
better the image will become.
Interval
Configures or customizes the snapshot frequency. You can select 1
second per one snapshot to 7 seconds per one snapshot. The
maximum is 3600 seconds per one snapshot.
Table 5-25
Click
Apply
to complete the settings.
Step 3
Summary of Contents for XVR Cooper Series
