Dahua Technology Wireless Door Detector Plus, User Manual

Page: 19 / 24

User's Manual
14
Parameter Description
LED Indicator
LED Indicator is enabled by default. For details on indicator behavior, see
"3.1 Appearance". If LED Indicator is disabled, the LED indicator will remain
off regardless of whether the door detector is functioning normally or not.
24 H Protection
Zone The peripheral located in the 24 h protection zone is always active whether
the security system is configured in the armed mode or not.
Home Mode
When the security system is Home armed, the detector will be armed only if
its
Home Mode
is enabled.
Delay Mode
under Home
Mode
Enable the Delay Mode under Home Mode , the selected peripheral under
the hub will be armed and the alarm will not be triggered until the end of
customized delay time.
Only enable Home Mode first can Delay Mode under Home Mode take
effect.
Delay Time
●
The system provides you with time to leave or enter the armed zone
without alarm.
◇
Delay Time for Entering Arming Mode : When you enter the zone, if
you do not disarm the system before the delay ends, an alarm will be
triggered.
Make sure that the delay time for entering arming mode is no longer
than 45 seconds in order to comply with EN50131-1.
◇
Delay Time for Exiting Arming Mode
: When you are in the zone and
arm the system, if you do not leave the zone before the delay ends,
an alarm will be triggered.
●
Select from 0 s to 120 s.
The arming mode will be effective after the delay time.
Alarm-video
Linkage
When an alarm is triggered, the peripherals will report the alarm events to
the hub and then will link events.
Video Channel Select the video channel as needed.
Door Detector
Alarm Config You can enable and disable the door detector alarm. After disabling, no
alarm is triggered when the door detector is opened.
External
Detector Config
You can enable or disable the external detector. After enabling, the external
detector status will be displayed.
●
Link external input to siren
●
External input type: You can select from
Normally Open
(default),
Normally Closed and Pulse .