Table of Contents 318
Figure 4-248
On the top right of the live view screen, use the left mouse button or press Shift to switch
between
(image switching is allowed) and
(image switching is not allowed) to turn
on/off the tour function.
On the navigation bar, click
to enable the tour and click
to disable it.
Step 2 Configure the settings for the tour parameters. See Table 4-71.
Table 4-71
Parameter
Description
Enable
Enable tour function.
Interval (Sec.)
Enter the amount of time that you want each channel group displays
on the screen. The value ranges from 5 seconds to 120 seconds, and
the default value is 5 seconds.
Video
Detect,
Alarm
Select the View 1 or View 8 for
Motion Detect
tour and
Alarm
Tour
(system alarm events).
Window Split
In the
Window Split
list, select
View 1
,
View 4
,
View 8
, or other
modes that are supported by the Device.
